-40%
Carburetor Retrofit for Generac 073112B NP QP IM Q & Prime Pact Units 73112
Carburetor Retrofit for Generac 073112B NP QP IM Q & Prime Pact Units 73112
Carburetor Retrofit for Generac 073112B NP QP IM Q & Prime Pact Units 73112
Carburetor Retrofit for Generac 073112B NP QP IM Q & Prime Pact Units 73112
Carburetor Retrofit for Generac 073112B NP QP IM Q & Prime Pact Units 73112

Carburetor Retrofit for Generac 073112B NP QP IM Q & Prime Pact Units 73112

$ 43.29

Availability: 100 in stock
  • Type: Carburetor
  • Refund will be given as: Money Back
  • Warranty: 60 Day
  • Return shipping will be paid by: Buyer
  • Brand: Carbstar
  • Condition: New
  • Returns Accepted: Returns Accepted
  • Item must be returned within: 30 Days
  • Manufacturer Part Number: 00595-0-1 00861-0 9206-0 NP-66G

    Description

    Carburetor Retrofit for Generac 073112B NP QP IM Q & Prime Pact Units 73112
    Product description:
    Carburetor Retrofit for Generac 073112B NP QP IM Q & Prime Pact Units 73112
    The original Generac 73112 (73112B) was a very common gasoline carb used on a variety of RV generators: NP, QP, IM, Q, and Prime Pact units. Models: 00595-0-1, 00784-1-2, 00843-0, 00860-0, 00861-0, 09206-0, 09290-4, 09393-3, 09592-3-4-5, 09600-3-4-5.
    The original carburetor # 73112B and the rebuild kit 075252 are both no longer available from Generac.
    However, we do have this carburetor that is similar. (see photos)
    This carb was designed for the same engine in a different application.  It will work and bolt up OK, but the linkages are a little different and the choke will need a spring to hold it open, etc.
    It does require that you are able and willing to retrofit a little bit.  We will not be able to take it back once it is installed.
    Again, it bolts right up and you can get it to run, but read below for the retro you may wish to do at your own risk.
    The nipple for the gas inlet is for rubber fuel hose and is straight - not at an angle.
    NOTE: The solenoid positive wire connects to wire #14 or the same wire that connects to the fuel pump, and the negative wire to ground or wire #0. (wire zero)
    The only differences between this carb and the OEM was that needed to remove the butterfly valve arm and then remove the detente ball that causes this carb valve to lock open. It needed to move freely and have a spring return. used the spring from the old carb and the drilled out the hole for the spring to set into and that worked fine.
    Package Includes: As Picture Show
    NOTE: Please match the part number with part number on the old part to ensure fitment before purchasing.
    Professional Installations Highly Recommended. (No Instruction Included)
    Who We Are
    Payment& Checkout
    Shipping
    Return Policy
    Contact Us
    Who We Are
    Payment& Checkout
    Shipping
    Return Policy
    Contact Us