TAD Triple Aught Design Fast Pack Scout SE Mutant X50 Black Multicam Booster Cp1

Description

TAD Triple Aught Design Fast Pack Scout SE Mutant X50 Black Multicam & Extras.
W/ VX black multkcam single booster pod & VX CP1 control panel
TAD Triple Aught Design Fast Pack Scout SE Mutant X50 Special Edition.
Condition is "like new"
Colour: Multicam Black/ Olive.
Very Sought After Item, this was a very limited run last year and sold out in less than 2 minutes.
OVERVIEW
This Special Edition is made using X50. Constructed from advanced materials to create a lightweight but resilient carry system. The shell is a durable Ripstop Polyester, yielding an extremely abrasion resistant, waterproof, tear resistant fabric.
Rugged construction and modular adaptability are the foundation of our FAST platform, helping you conquer the routine, the unexpected and everything in between. Combining the best of military design and mountaineering ergonomics, FAST Packs are built to be your trusted companion for adventures close to home or missions far away.
The FAST Pack Scout combines the ruggedness and modularity of our FAST platform with the weight and agility of a minimalist summit pack. At 15 liters in volume and 1 kilogram in weight, the Scout's agile profile and flexible storage options make it the perfect companion when you need to move fast.
DETAILS
-
MATERIAL
X50 Shell in Multicam Black
VX-07 Liner in Olive
Evazote® Closed Cell Cross-Linked Ethylene Copolymer Foam
DRI-LEX® Aerospacer Moisture Management Mesh
Hypalon Synthetic Rubber Reinforcements
HDPE Frame Sheet
Velcro® panel for Ranger Eye at hip
Elastic Retainer Straps
DIMENSIONS
Volume: 915.36 cu in (15.00 liters)
10" (25.40 cm) W x 16.625" (42.23 cm) H x 4" (10.16 cm) D
WEIGHT
33.84 oz (.96 kg)
POCKET CONFIGURATION
Full length front 3D pocket with admin and D ring tether
Full length inverted front pocket w/ Velcro closure
Full clamshell main compartment
Hydration sleeve w/ mesh retention pocket
Full length pleated mesh internal zippered pocket
ZIPPERS & HARDWARE
YKK® #8 and #10 Uretek® Water-Resistant Reverse Coil Zippers with Paracord Zipper Pulls
ITW GhillieTEX™ Web Dominators to Secure Webbing
ITW GhillieTEX™ Looploc anchor points
ITW GhillieTEX™ SR Ladderloc buckles
ITW GhillieTEX™ Cordlocs, Ladderlocs, Tri-Glides, and other hardware.
CARE INSTRUCTIONS
DO NOT machine wash or machine dry. This will severely affect the material properties, and may cause delamination.
Do not use bleach, solvents or other harsh chemicals
Use mild soap and water to wash
Rub with a soft cloth or sponge
Rinse with fresh water
Hang to dry
ADMIN COMPARTMENT
A versatile 3-D admin compartment helps organize smaller EDC items such as pens, lights, passports, knives, or cables. This keeps your items separated and easily accessible when you need them.
TECH CARRY
The full depth admin compartment is sized to carry larger EDC items such as smaller laptops, tablets, or magazines.
MAIN COMPARTMENT SLEEVE - EDC
The main compartment contains a mesh sleeve sized to fit thinner tech items such as thin laptops or tablets.
MAIN COMPARTMENT SLEEVE - HYDRATION
The main compartment's mesh sleeve can also be used to house a hydration bladder. The top of the main compartment also contains a hydration bladder hanger to adjust the height of the bladder. The hydration bladder hose can be routed through the top hydration hose port.
CONTROL PANEL COMPATIBLE
The main compartment also contains two top anchor points, making the pack compatible with any Control Panel or Transport Sleeve.
FULL CLAMSHELL OPENING TO QUICKLY AND EASILY ACCESS ALL INTERNAL CONTENTS.
ADDITIONAL STORAGE
The front of the main compartment contains a single zippered compartment, gusseted to hold additional carry items such as gloves, headwear, or cables.
TECH SIZING
The main compartment is sized to fit up to a 16" MacBook Pro or equivalent sized laptop.
TRANSPORT SLEEVE SIZING
The main compartment is sized to accommodate both the Small and Medium Transport Sleeve.
INVERTED STORAGE
The inverted pocket allows for gear segregation and swift access without having to open the main compartment or admin compartment. This compartment can also be used to store a transport tail when not in use.
LOW PROFILE CARRY HANDLE
A low profile Hypalon Synthetic Rubber Reinforced carry handle lays flats to avoid snagging when not in use.
TRANSPORT TAIL COMPATIBLE
The Transporter Tail can quickly and can easily be attached to the included compression straps on the FAST Pack Scout. When not in use, the Transport Tail can be stowed in the inverted pocket for a sleek, clean look.
STABILITY BELT
Includes a removable 1” stability belt.
MOLLE COMPATIBLE
Four 1" webbing loops on either side of the FAST Pack Scout allow for single or double row MOLLE accessories to be attached.
COMPRESSION STRAPS
The included compression straps can be easily removed or used to strap loose gear to the FAST Pack Scout.
SHOULDER STRAPS
Polyester and nylon mesh aid in veltilstion on the shoulder straps and back panel of the pack. The mesh also creates a softer surface to decrease wear and tear on your apparel.
PADDING
Featuring Evazote® Closed Cell Cross-Linked Ethylene Copolymer Foam throughout the shoulder straps to ensure a soft and comfortable carry.
LOAD MANAGEMENT
Engineered suspension geometry and a HDPE framesheet enable the pack to ride higher on your back. Load lifters allow the load to be pulled into the body for maximum comfort.
AIRFLOW MANAGEMENT
Raised panels of Evazote® Closed Cell Cross-Linked Ethylene Copolymer Foam contained within DRI-LEX® Aerospacer Moisture Management Mesh helps create a channel on the center back to allow for increased airflow to minimize sweating and heat buildup withe pack against your back.